dmesg - Intel Core i7-5820K
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2+deb7u1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000792da000 (usable)
BIOS-e820: 00000000792da000 - 0000000079e4a000 (reserved)
BIOS-e820: 0000000079e4a000 - 000000007a107000 (usable)
BIOS-e820: 000000007a107000 - 000000007ac98000 (ACPI NVS)
BIOS-e820: 000000007ac98000 - 000000007b61a000 (reserved)
BIOS-e820: 000000007b61a000 - 000000007b61b000 (usable)
BIOS-e820: 000000007b61b000 - 000000007b6a1000 (reserved)
BIOS-e820: 000000007b6a1000 - 000000007b8b8000 (usable)
BIOS-e820: 000000007b8b8000 - 000000007bff9000 (reserved)
BIOS-e820: 000000007bff9000 - 000000007c000000 (usable)
BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001080000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7882/X99S GAMING 9 AC (MS-7882), BIOS 1.10 08/26/2014
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x1080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 00007F000000 mask 3FFFFF000000 uncachable
3 base 0000E8000000 mask 3FFFF8000000 write-through
4 base 0000F0000000 mask 3FFFFE000000 write-through
5 base 0000F2000000 mask 3FFFFFE00000 write-through
6 base 0000F2200000 mask 3FFFFFF00000 write-through
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fda00] fda00
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007c000000
0000000000 - 0040000000 page 1G
0040000000 - 007c000000 page 2M
kernel direct mapping tables up to 7c000000 @ 1fffe000-20000000
init_memory_mapping: 0000000100000000-0000001080000000
0100000000 - 1080000000 page 1G
kernel direct mapping tables up to 1080000000 @ 7bfff000-7c000000
RAMDISK: 36bf2000 - 375f1000
ACPI: RSDP 00000000000f0540 00024 (v02 ALASKA)
ACPI: XSDT 000000007a913090 000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007a93fd68 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
ACPI: DSDT 000000007a9131d0 2CB93 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 000000007ac94f80 00040
ACPI: APIC 000000007a93fe78 00100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000007a93ff78 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 000000007a93ffc0 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000007a940060 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 000000007a9400a0 00042 (v01 00000000 00000000)
ACPI: BDAT 000000007a9400e8 00030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 000000007a940118 00038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 000000007a940150 00090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 000000007a9401e0 00064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 000000007a940248 0002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 000000007a940278 00E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 000000007a9410d0 00040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 000000007a941110 0D647 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: DMAR 000000007a94e758 000F4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 000000007a94e850 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-1080000000
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [0,80000000) + [100000000,1080000000) -> [0,1080000000)
Initmem setup node 0 0000000000000000-0000001080000000
NODE_DATA [000000107fffa000 - 000000107fffefff]
[ffffea0000000000-ffffea0039bfffff] PMD -> [ffff88103f600000-ffff8810775fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x01080000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000792da
0: 0x00079e4a -> 0x0007a107
0: 0x0007b61a -> 0x0007b61b
0: 0x0007b6a1 -> 0x0007b8b8
0: 0x0007bff9 -> 0x0007c000
0: 0x00100000 -> 0x01080000
On node 0 totalpages: 16750404
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 479214 pages, LIFO batch:31
Normal zone: 222208 pages used for memmap
Normal zone: 16030720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000792da000 - 0000000079e4a000
PM: Registered nosave memory: 000000007a107000 - 000000007ac98000
PM: Registered nosave memory: 000000007ac98000 - 000000007b61a000
PM: Registered nosave memory: 000000007b61b000 - 000000007b6a1000
PM: Registered nosave memory: 000000007b8b8000 - 000000007bff9000
PM: Registered nosave memory: 000000007c000000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88107fc00000 s82944 r8192 d23552 u131072
pcpu-alloc: s82944 r8192 d23552 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16513855
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65997928k/69206016k available (3432k kernel code, 2204400k absent, 1003688k reserved, 3306k data, 580k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:1184 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3299.942 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.88 BogoMIPS (lpj=13199768)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
IOMMU 0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
IOMMU 1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007b487000 end: 0x0000007b496fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1
IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 1
HPET id 0 under DRHD base 0xfbffc000
------------[ cut here ]------------
WARNING: at /build/linux-Af5mgi/linux-3.2.63/drivers/iommu/intr_remapping.c:558 enable_intr_remapping+0x71/0x266()
Hardware name: MS-7882
Your BIOS is broken and requested that x2apic be disabled
This will leave your machine vulnerable to irq-injection attacks
Use 'intremap=no_x2apic_optout' to override BIOS request
Modules linked in:
Pid: 1, comm: swapper/0 Not tainted 3.2.0-4-amd64 #1 Debian 3.2.63-2+deb7u1
Call Trace:
[] ? warn_slowpath_common+0x78/0x8c
[] ? warn_slowpath_fmt+0x45/0x4a
[] ? enable_intr_remapping+0x71/0x266
[] ? enable_IR_x2apic+0x7a/0x1d3
[] ? _raw_spin_unlock_irqrestore+0xe/0xf
[] ? default_setup_apic_routing+0xd/0x71
[] ? native_smp_prepare_cpus+0x2dc/0x2f4
[] ? kernel_init+0x7f/0x157
[] ? kernel_thread_helper+0x4/0x10
[] ? start_kernel+0x3c8/0x3c8
[] ? gs_change+0x13/0x13
---[ end trace 61f67e09e0ea1d57 ]---
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz stepping 02
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
TSC synchronization [CPU#0 -> CPU#1]:
Measured 76657999450686 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#8
smpboot cpu 8: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#9
smpboot cpu 9: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#10
smpboot cpu 10: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
#11 Ok.
smpboot cpu 11: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 12 CPUs
Total of 12 processors activated (79197.74 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 7a107000 (12128256 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: BIOS offers _GTS
ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
pci 0000:ff:0b.0: [8086:2f81] type 0 class 0x000880
pci 0000:ff:0b.1: [8086:2f36] type 0 class 0x001101
pci 0000:ff:0b.2: [8086:2f37] type 0 class 0x001101
pci 0000:ff:0c.0: [8086:2fe0] type 0 class 0x000880
pci 0000:ff:0c.1: [8086:2fe1] type 0 class 0x000880
pci 0000:ff:0c.2: [8086:2fe2] type 0 class 0x000880
pci 0000:ff:0c.3: [8086:2fe3] type 0 class 0x000880
pci 0000:ff:0c.4: [8086:2fe4] type 0 class 0x000880
pci 0000:ff:0c.5: [8086:2fe5] type 0 class 0x000880
pci 0000:ff:0f.0: [8086:2ff8] type 0 class 0x000880
pci 0000:ff:0f.1: [8086:2ff9] type 0 class 0x000880
pci 0000:ff:0f.4: [8086:2ffc] type 0 class 0x000880
pci 0000:ff:0f.5: [8086:2ffd] type 0 class 0x000880
pci 0000:ff:0f.6: [8086:2ffe] type 0 class 0x000880
pci 0000:ff:10.0: [8086:2f1d] type 0 class 0x000880
pci 0000:ff:10.1: [8086:2f34] type 0 class 0x001101
pci 0000:ff:10.5: [8086:2f1e] type 0 class 0x000880
pci 0000:ff:10.6: [8086:2f7d] type 0 class 0x001101
pci 0000:ff:10.7: [8086:2f1f] type 0 class 0x000880
pci 0000:ff:12.0: [8086:2fa0] type 0 class 0x000880
pci 0000:ff:12.1: [8086:2f30] type 0 class 0x001101
pci 0000:ff:13.0: [8086:2fa8] type 0 class 0x000880
pci 0000:ff:13.1: [8086:2f71] type 0 class 0x000880
pci 0000:ff:13.2: [8086:2faa] type 0 class 0x000880
pci 0000:ff:13.3: [8086:2fab] type 0 class 0x000880
pci 0000:ff:13.4: [8086:2fac] type 0 class 0x000880
pci 0000:ff:13.5: [8086:2fad] type 0 class 0x000880
pci 0000:ff:13.6: [8086:2fae] type 0 class 0x000880
pci 0000:ff:13.7: [8086:2faf] type 0 class 0x000880
pci 0000:ff:14.0: [8086:2fb0] type 0 class 0x000880
pci 0000:ff:14.1: [8086:2fb1] type 0 class 0x000880
pci 0000:ff:14.2: [8086:2fb2] type 0 class 0x000880
pci 0000:ff:14.3: [8086:2fb3] type 0 class 0x000880
pci 0000:ff:14.6: [8086:2fbe] type 0 class 0x000880
pci 0000:ff:14.7: [8086:2fbf] type 0 class 0x000880
pci 0000:ff:15.0: [8086:2fb4] type 0 class 0x000880
pci 0000:ff:15.1: [8086:2fb5] type 0 class 0x000880
pci 0000:ff:15.2: [8086:2fb6] type 0 class 0x000880
pci 0000:ff:15.3: [8086:2fb7] type 0 class 0x000880
pci 0000:ff:16.0: [8086:2f68] type 0 class 0x000880
pci 0000:ff:16.6: [8086:2f6e] type 0 class 0x000880
pci 0000:ff:16.7: [8086:2f6f] type 0 class 0x000880
pci 0000:ff:17.0: [8086:2fd0] type 0 class 0x000880
pci 0000:ff:17.4: [8086:2fb8] type 0 class 0x000880
pci 0000:ff:17.5: [8086:2fb9] type 0 class 0x000880
pci 0000:ff:17.6: [8086:2fba] type 0 class 0x000880
pci 0000:ff:17.7: [8086:2fbb] type 0 class 0x000880
pci 0000:ff:1e.0: [8086:2f98] type 0 class 0x000880
pci 0000:ff:1e.1: [8086:2f99] type 0 class 0x000880
pci 0000:ff:1e.2: [8086:2f9a] type 0 class 0x000880
pci 0000:ff:1e.3: [8086:2fc0] type 0 class 0x000880
pci 0000:ff:1e.3: reg 10: [io 0x0020-0x003f]
pci 0000:ff:1e.4: [8086:2f9c] type 0 class 0x000880
pci 0000:ff:1f.0: [8086:2f88] type 0 class 0x000880
pci 0000:ff:1f.2: [8086:2f8a] type 0 class 0x000880
ACPI: PCI Interrupt Routing Table [\_SB_.UNC0._PRT]
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 0 class 0x000600
pci 0000:00:01.0: [8086:2f02] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:2f03] type 1 class 0x000604
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:2f04] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2f08] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:2f0a] type 1 class 0x000604
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:2f28] type 0 class 0x000880
pci 0000:00:05.1: [8086:2f29] type 0 class 0x000880
pci 0000:00:05.2: [8086:2f2a] type 0 class 0x000880
pci 0000:00:05.4: [8086:2f2c] type 0 class 0x000800
pci 0000:00:05.4: reg 10: [mem 0xfb71c000-0xfb71cfff]
pci 0000:00:11.0: [8086:8d7c] type 0 class 0x00ff00
pci 0000:00:14.0: [8086:8d31] type 0 class 0x000c03
pci 0000:00:14.0: reg 10: [mem 0xfb700000-0xfb70ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfb71b000-0xfb71b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfb718000-0xfb7183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8d20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfb710000-0xfb713fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8d14] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:8d16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:8d18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:8d1c] type 1 class 0x000604
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:8d1e] type 1 class 0x000604
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfb717000-0xfb7173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d47] type 0 class 0x000601
pci 0000:00:1f.2: [8086:8d02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 14: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 18: [io 0xf030-0xf037]
pci 0000:00:1f.2: reg 1c: [io 0xf020-0xf023]
pci 0000:00:1f.2: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 24: [mem 0xfb716000-0xfb7167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfb715000-0xfb7150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:04:00.0: [10de:1004] type 0 class 0x000300
pci 0000:04:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:04:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:04:00.0: reg 30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:04:00.1: [10de:0e1a] type 0 class 0x000403
pci 0000:04:00.1: reg 10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:05:00.0: [10b5:8603] type 1 class 0x000604
pci 0000:05:00.0: reg 10: [mem 0xfb600000-0xfb603fff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.2: PCI bridge to [bus 05-08]
pci 0000:00:03.2: bridge window [io 0xb000-0xcfff]
pci 0000:00:03.2: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:03.2: bridge window [mem 0xf2100000-0xf22fffff 64bit pref]
pci 0000:06:01.0: [10b5:8603] type 1 class 0x000604
pci 0000:06:01.0: supports D1 D2
pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:02.0: [10b5:8603] type 1 class 0x000604
pci 0000:06:02.0: supports D1 D2
pci 0000:06:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:05:00.0: bridge window [io 0xb000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xf2100000-0xf22fffff 64bit pref]
pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:07:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:07:00.0: reg 18: [mem 0xf2204000-0xf2204fff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xf2200000-0xf2203fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:01.0: PCI bridge to [bus 07-07]
pci 0000:06:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:01.0: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:08:00.0: reg 10: [io 0xb000-0xb0ff]
pci 0000:08:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:08:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:02.0: PCI bridge to [bus 08-08]
pci 0000:06:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:06:02.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:0a:00.0: [1969:e091] type 0 class 0x000200
pci 0000:0a:00.0: reg 10: [mem 0xfb500000-0xfb53ffff 64bit]
pci 0000:0a:00.0: reg 18: [io 0xd000-0xd07f]
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:0b:00.0: [1106:3483] type 0 class 0x000c03
pci 0000:0b:00.0: reg 10: [mem 0xfb400000-0xfb400fff 64bit]
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0c:00.0: [1b21:1142] type 0 class 0x000c03
pci 0000:0c:00.0: reg 10: [mem 0xfb300000-0xfb307fff 64bit]
pci 0000:0c:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0d:00.0: [8086:08b1] type 0 class 0x000280
pci 0000:0d:00.0: reg 10: [mem 0xfb200000-0xfb201fff 64bit]
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:0e:00.0: [1af2:a001] type 0 class 0x00ff00
pci 0000:0e:00.0: reg 10: [mem 0xfb110000-0xfb11ffff]
pci 0000:0e:00.0: reg 14: [mem 0xfb100000-0xfb10ffff]
pci 0000:00:1c.7: PCI bridge to [bus 0e-0e]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3C._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: no compatible bridge window for [io 0x0020-0x003f]
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 00000000792da000 - 000000007bffffff
reserve RAM buffer: 000000007a107000 - 000000007bffffff
reserve RAM buffer: 000000007b61b000 - 000000007bffffff
reserve RAM buffer: 000000007b8b8000 - 000000007bffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus ff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [bus 00-fe]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x03af window]
pnp 00:01: [io 0x03e0-0x0cf7 window]
pnp 00:01: [io 0x03b0-0x03df window]
pnp 00:01: [io 0x1000-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x00000000 window]
pnp 00:01: [mem 0x90000000-0xfbffbfff window]
pnp 00:01: [mem 0x00000000 window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [mem 0xfec00000-0xfecfffff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:03: [io 0x0454-0x0457]
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [io 0x0074-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [io 0x0400-0x047f]
pnp 00:09: [io 0x0092]
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0072-0x0073]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x0580-0x059f]
pnp 00:09: [io 0x0600-0x061f]
pnp 00:09: [io 0x0880-0x0883]
pnp 00:09: [io 0x0800-0x081f]
pnp 00:09: [mem 0xfed1c000-0xfed3ffff]
pnp 00:09: [mem 0xfed45000-0xfed8bfff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfed12000-0xfed1200f]
pnp 00:09: [mem 0xfed12010-0xfed1201f]
pnp 00:09: [mem 0xfed1b000-0xfed1bfff]
pnp 00:09: disabling [io 0x0010-0x001f] because it overlaps 0000:ff:1e.3 BAR 0 [io 0x0000-0x001f]
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [io 0x0400-0x047f] could not be reserved
system 00:09: [io 0x0580-0x059f] has been reserved
system 00:09: [io 0x0600-0x061f] has been reserved
system 00:09: [io 0x0880-0x0883] has been reserved
system 00:09: [io 0x0800-0x081f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:09: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0a00-0x0a0f]
pnp 00:0a: [io 0x0a10-0x0a1f]
pnp 00:0a: [io 0x0a20-0x0a2f]
pnp 00:0a: [io 0x0a30-0x0a3f]
system 00:0a: [io 0x0a00-0x0a0f] has been reserved
system 00:0a: [io 0x0a10-0x0a1f] has been reserved
system 00:0a: [io 0x0a20-0x0a2f] has been reserved
system 00:0a: [io 0x0a30-0x0a3f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:ff:1e.3: BAR 0: can't assign io (size 0x20)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [io 0x0020-0x003f]
pci 0000:ff:1e.3: BAR 0: [io 0x0020-0x003f] conflicts with PCI Bus 0000:00 [io 0x0000-0x03af]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:05:00.0: BAR 14: can't assign mem (size 0x400000)
pci 0000:06:01.0: BAR 14: can't assign mem (size 0x400000)
pci 0000:06:01.0: PCI bridge to [bus 07-07]
pci 0000:06:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:01.0: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:06:02.0: PCI bridge to [bus 08-08]
pci 0000:06:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:06:02.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:05:00.0: bridge window [io 0xb000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xf2100000-0xf22fffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 05-08]
pci 0000:00:03.2: bridge window [io 0xb000-0xcfff]
pci 0000:00:03.2: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:03.2: bridge window [mem 0xf2100000-0xf22fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.2: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0e-0e]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: setting latency timer to 64
pci 0000:05:00.0: setting latency timer to 64
pci 0000:06:01.0: setting latency timer to 64
pci 0000:06:02.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:04: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf22fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xb000-0xcfff]
pci_bus 0000:06: resource 2 [mem 0xf2100000-0xf22fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:08: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:0b: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0c: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0d: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0e: resource 1 [mem 0xfb100000-0xfb1fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10236k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800752da000 - ffff8800792da000
software IO TLB at phys 0x752da000 - 0x792da000
audit: initializing netlink socket (disabled)
type=2000 audit(1417984783.376:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 66 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
pcieport 0000:00:01.1: irq 67 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 68 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 69 for MSI/MSI-X
pcieport 0000:00:03.2: setting latency timer to 64
pcieport 0000:00:03.2: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 72 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 73 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 74 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 75 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 76 for MSI/MSI-X
pcieport 0000:05:00.0: setting latency timer to 64
pcieport 0000:05:00.0: irq 77 for MSI/MSI-X
pcieport 0000:06:01.0: setting latency timer to 64
pcieport 0000:06:01.0: irq 78 for MSI/MSI-X
pcieport 0000:06:02.0: setting latency timer to 64
pcieport 0000:06:02.0: irq 79 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:03.2:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:01.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:02.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:06:01.0:pcie24: HPC vendor_id 10b5 device_id 8603 ss_vid 10b5 ss_did 8603
pciehp 0000:06:01.0:pcie24: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: does not run on family 6 model 63
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-12-07 20:39:44 UTC (1417984784)
Initializing network drop monitor service
Freeing unused kernel memory: 580k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 648k freed
Freeing unused kernel memory: 688k freed
udevd[88]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: setting latency timer to 64
r8169 0000:07:00.0: irq 80 for MSI/MSI-X
r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc90017036000, 68:1c:a2:12:34:19, XID 0c900800 IRQ 80
r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: setting latency timer to 64
r8169 0000:08:00.0: irq 81 for MSI/MSI-X
r8169 0000:08:00.0: eth1: RTL8168evl/8111evl at 0xffffc90016fb2000, 68:1c:a2:12:34:1a, XID 0c900800 IRQ 81
r8169 0000:08:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
xhci_hcd 0000:0b:00.0: setting latency timer to 64
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0b:00.0: irq 82 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:0b:00.0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 83 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:0b:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb716000 port 0xfb716100 irq 83
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfb716000 port 0xfb716200 irq 83
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfb718000
xhci_hcd 0000:0c:00.0: setting latency timer to 64
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0c:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 89 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 90 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 91 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb6: SerialNumber: 0000:0c:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb7: SerialNumber: 0000:0c:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 18, io mem 0xfb717000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 3-1: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: Crucial_CT512MX100SSD1, MU01, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT512MX1 MU01 PQ: 0 ANSI: 5
usb 3-1: New USB device found, idVendor=2109, idProduct=3431
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: configured for UDMA/133
hub 3-1:1.0: USB hub found
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
hub 3-1:1.0: 4 ports detected
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb 5-1: new high-speed USB device number 2 using ehci_hcd
usb 5-1: New USB device found, idVendor=8087, idProduct=800a
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
usb 6-2: new full-speed USB device number 2 using xhci_hcd
usb 6-2: New USB device found, idVendor=10c4, idProduct=ea60
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: CP2102 USB to UART Bridge Controller
usb 6-2: Manufacturer: Silicon Labs
usb 6-2: SerialNumber: 0001
usb 8-1: new high-speed USB device number 2 using ehci_hcd
usb 8-1: New USB device found, idVendor=8087, idProduct=8002
usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 8 ports detected
usb 3-1.2: new full-speed USB device number 3 using xhci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 3-1.2: New USB device found, idVendor=046d, idProduct=c52b
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: USB Receiver
usb 3-1.2: Manufacturer: Logitech
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 8-1.7: new full-speed USB device number 3 using ehci_hcd
udevd[721]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
wmi: Mapper loaded
usb 8-1.7: New USB device found, idVendor=8087, idProduct=07dc
usb 8-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ACPI: Requesting acpi_cpufreq
ACPI: acpi_idle registered with cpuidle
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
nouveau 0000:04:00.0: setting latency timer to 64
[drm] nouveau 0000:04:00.0: unsupported chipset 0x0f0040a1
nouveau: probe of 0000:04:00.0 failed with error -22
input: PC Speaker as /devices/platform/pcspkr/input/input2
snd_hda_intel 0000:00:1b.0: irq 92 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0b:00.0-1.2/input2
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbserial_generic
input: Logitech Unifying Device. Wireless PID:4031 as /devices/pci0000:00/0000:00:1c.3/0000:0b:00.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0003/input/input3
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4031] on usb-0000:0b:00.0-1.2:1
USB Serial support registered for cp210x
cp210x 6-2:1.0: cp210x converter detected
input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1c.3/0000:0b:00.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:046D:C52B.0003/input/input4
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:0b:00.0-1.2:2
hda_codec: ALC1150: BIOS auto-probing.
hda_codec: ALC1150: SKU not ready 0x00000000
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
hda_intel: Disabling MSI
snd_hda_intel 0000:04:00.1: setting latency timer to 64
usb 6-2: reset full-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:0c:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88103c6a2b80
xhci_hcd 0000:0c:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88103c6a2b40
usb 6-2: cp210x converter now attached to ttyUSB0
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=6 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input7
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input10
Adding 20260860k swap on /dev/sda5. Priority:-1 extents:1 across:20260860k SS
EXT4-fs (sda1): re-mounted. Opts: (null)
loop: module loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778)
r8169 0000:07:00.0: firmware: agent aborted loading rtl_nic/rtl8168e-3.fw (not found?)
r8169 0000:07:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
r8169 0000:07:00.0: eth0: link down
r8169 0000:07:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:08:00.0: firmware: agent aborted loading rtl_nic/rtl8168e-3.fw (not found?)
r8169 0000:08:00.0: eth1: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
r8169 0000:08:00.0: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
[PCSPP,TRISTATE]
parport0: irq 0 detected
lp0: using parport0 (polling).
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
r8169 0000:07:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready